Technical Data; General Warnings - Rupes EK150AE Instrucciones De Uso Y Manutención

TECHNICAL DATA

TYPE
PROTECTION CLASS
OPERATING VOLTAGE
ABSORBED CURRENT
ABSORBED POWER
ELECTRONIC OVERLOAD PROTECTION
ELECTRONIC SPEED CONTROL
TRANSMISSION
ROTATION RPM
ORBITAL DIAMETER mm
DISC PAD DIAMETER mm
DISC PAD TYPE
EXTRACTION SYSTEM
WEIGHT Kg

GENERAL WARNINGS

The tool must be connected to a suitable dust extraction system (not supplied).
SAFETY AND ACCIDENT PREVENTION INSTRUCTIONS
The safety and accident prevention instructions are reported in
the "SAFETY INSTRUCTION" booklet which forms an integral part
of these documents; the operating instructions indicate the
additional information required specifically for use of the tool.
Never use the tools without the safety guards.
Any operations carried out on the tool must be effected with the
power supply disconnected.
Before starting the tool, ensure that it is held tightly and not in
contact with the work surface.
Wear clothing suited to the work you are about to perform.
The electric tool must be connect to a suitable dust extraction unit
(not supplied): use regulation safety devices for personal
protection and observe safety norms valid for the processed work
material.
Due to risks that may arise during polishing, we recommend the
8
EK150AE
II
230 V - 50 Hz
2,7 A
550 W
YES
YES
GEARS
200 ÷ 500
5
150
VELCRO FACED
YES
2,300
constant use of P .S.D. (personal safety devices such as gloves,
headphones, goggles, face masks, etc.) according to laws in for-
ce to prevent or reduce accident probability.
Warning! the appliance continues to work for a few seconds after
it has been switched off!
CORRECT USAGE
The sanders are designed for sanding wood, plastic, composite
materials, paint/varnish, filling material and similar materials.
Metal and materials with an asbestos content must not be
processed with these tools.
The machine must not be operated in humid environments or in
the presence of flammable gas or liquids.
Make sure the work piece is sufficiently fastened.
In the event of improper use, the user is fully liable for any
damages or accidents.
ENGLISH
8
EK200A
II
230 V - 50 Hz
2,7 A
550 W
NO
NO
GEARS
500
5
200
VELCRO FACED
YES
2,500