Technical Data; General Warnings; Correct Usage - Rupes RA75 Instrucciones De Uso Y Manutención

TECHNICAL DATA

TYPE
WORKING PRESSURE bar
AIR CONSUMPTION l/min
SPEED CONTROL
RPM
ORBITAL DIAMETER mm
DISC PAD DIAMETER mm
EXTRACTION SYSTEM
WEIGHT Kg

GENERAL WARNINGS

The tool must be connected to a suitable dust extraction system RA75A (not supplied).
SAFETY AND ACCIDENT PREVENTION INSTRUCTIONS
The safety and accident prevention instructions are reported in the
"SAFETY INSTRUCTION" booklet which forms an integral part of
these documents; the operating instructions indicate the additional
information required specifically for use of the tool.
Never use the tools without the safety guards.
Any operations carried out on the tool must be effected with the tool
disconnected.
Before starting the tool, ensure that it is held tightly and not in contact
with the work surface.
If harmful dust is formed during work, wear an appropriate face mask
and observe the safety norms valid for the processed work piece.
Due to risks that may arise during sanding, we recommend the con-
stant use of P .S.D. (personal safety devices such as gloves, headpho-
nes, goggles, face masks, etc.) according to laws in force to prevent
or reduce accident probability.
8
RA75 - RA75A
6
380
YES
OFF÷11.000
3
75
RA75A
0,680
Warning! Carry out the lubrication process outlined on page 10, in
the maintenance paragraph. The appliance continues to work for a
few seconds after it has been switched off.

CORRECT USAGE

The sanders are designed for sanding wood, plastic, composite
materials, paint/varnish, filling material and similar materials.
Materials with asbestos content must not be processed with these
tools.
The tools may only be used for dry sanding.
Make sure the work piece is sufficiently fastened.
In the event of improper use, the user is fully liable for any damages or
accidents.
ENGLISH 8