Emerson PRO SERIES CF712AB02 Manual Del Usuario página 14

BP7300-7 CF712 PRO SERIES.qxp_BP7300 3/2/15 1:48 PM Page 14
9. How to Wire Your Ceiling Fan
9.3
Securely connect the fan motor black wire and blue
wire to the supply black (hot) wire using wire connector
supplied (Figure 16).
9.4
After connections have been made, turn leads upward
and carefully push leads into the outlet box, with the
white and green leads on one side of the outlet box and
black leads on the other side of the outlet box
(Figure 17).
Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire
connectors, except for the ground wire. Do not operate
fan until blades are in place. Noise and fan damage
could result.
WARNING
!
(Continued)
Hanger Ball/Downrod Assembly Shown
LISTED WIRE
CONNECTOR
SUPPLY
BLACK
(HOT)
BLUE
FAN
WIRE
FAN MOTOR
BLACK FAN
WIRE
Figure 16
Hanger Ball/Downrod Assembly Shown
WHITE WIRES
TWO BLACK WIRES
AND ONE BLUE WIRE
GREEN WIRES
Figure 17
14
U.L. Model No.: 52-ANT