Dantherm CDF 10 Manual Del Usuario página 17

Built-in hygrostat The dehumidifier is controlled by
a built-in hygrostat that is set to
approx. 60 % RH. When the hy-
grostat registers a relative hu-
midity of more than 60 %RH, the
compressor and the fan automat-
ically switch on and the dehu-
midifier starts to dehumidify.
The front panel has to be
removed before adjusting the
hygrostat. The hygrostat is
located under the control box
and can be adjusted by turning
the set screw.
17
Continued overleaf