Dantherm CDF 10 Manual Del Usuario página 20

Mounting and installation,
Note On the rear of the unit a cable binder protects the compressor during transport. This
cable binder must be removed before suspension and power connection
Condensate outlet The condensate outlet is located at the bottom of the dehumidifier. The unit has a drain
spigot intended for connection of a ½'' flexible or fixed water connection. If water drain
through the wall is chosen, a suitable hole is made in the wall and the condensate hose
is led out through this hole, before suspending the dehumidifier on the wall suspension
bar.
As an alternative a condensate pump can be fitted at the water outlet to pump the water
to a drain.
Placing of the The placing of the condensate out-
condensate outlet let is shown on the drawing:
Connection of power The unit is delivered complete with cable and plug for connection to 230V/50Hz.
supply Power is connected to the unit in accordance with the nameplate. Please refer to the
wiring diagram on page 111.
Note: All electrical connections must be made in accordance with local power supply.
20
continued