How To Use The Buttons; Auto Operation; Cooling/Heating/Fan Operation; Dehumidifying Operation - Daitsu APD-9CR Manual Del Usario

How to use the buttons

Auto operation

Ensure the unit is plugged in and power is available. The
OPERATION indicator on the display panel of the indoor
unit illuminates.
1. Press the MODE button to select Auto.
2. Press the TEMP button to set the desired temperature.
The temperature can be set within a range of
17ºC(62ºF)~ 30ºC in 1 C(2ºF) increments.
3. Press the ON/OFF button to start the air conditioner.
NOTE
1. In the Auto mode, the air conditioner can logically
choose the mode of Cooling, Fan, Heating and
Dehumidifying by sensing the difference between the
actual ambient room temperature and the set
temperature on the remote controller.
2. In the Auto mode, you can not switch the fan speed.
It has already been automatically controlled.
3. If the Auto mode is not comfortable for you , the
desired mode can be selected manually.
Cooling /Heating/Fan operation
Ensure the unit is plugged in and power is available.
1. Press the MODE button to select COOL, HEAT,
(cooling & heating models only) or FAN mode.
2. Press the TEMP button to set the desired
temperature. The temperature can be set within a range
of 3. Press the FAN SPEED button to select the fan
speed in four steps- Auto, Low, Med,or High.
4. Press the ON/OFF button to start the air conditioner.
17ºC(62ºF)~ 3ºC in 1ºC(2ºF) increments.
NOTE
In the FAN mode, the setting temperature is not
displayed in the remote controller and you are not able
to control the room temperature either. In this case, only
step 1, 3 and 4 may be performed
21

Dehumidifying operation

Ensure the unit is plugged in and power is available. The
OPERATION indicator on the display panel of the indoor
unit illuminates.
1. Press the MODE button to select DRY mode.
2. Press the TEMP button to set the desired temperature.
The temperature can be set within a range of increments.
3. Press the ON/OFF button to start the air conditioner.
17ºC (62ºF)~ 30ºC in 1ºC(2ºF)
NOTE
In the Dehumidifying mode, you can not switch
the fan speed. It has already been automatically
controlled.
Swing operation(on some models)
Use the SWING button to adjust the Up/Down airflow
direction .
1. When press the button once and quickly, the air flow
direction setting feature of the louver is activated. The
moving angle of the louver is 6o for each press. Keep
pressing the button to move the louver to the desired
position.
NOTE:On some models press it to initiate the Auto
swing feature only.
2. If keep pressing the SWING button without releasing
for 2 more seconds, the auto swing feature of the louver
is activated. The horizontal louver would swing up/down
automatically.
Press it again to stop
.
NOTE
When the louver swing or move to a position which would
affect the cooling and heating effect of the air conditioner,
it would automatically change the swing/ moving
direction.
22