Silverline 942944 Manual De Instrucciones página 7

942944
• To stop the tool, move the Sanding Belt away from the workpiece, fully release the Throttle
Trigger and allow the Safety Catch to re-engage
Accessories
• A range of accessories and consumables, including Coiled Air Hose (269591), Air Filter
Regulator & Lubricator (245014) and Mini In-Line Oiler (456965) is available from your
Silverline stockist. Spare parts can be obtained from toolsparesonline.com
Maintenance
General inspection
• Regularly check that all the fixing screws are tight
Cleaning
• Keep your tool clean at all times. Dirt and dust will cause internal parts to wear quickly, and
shorten the machine's service life. Clean the body of your machine with a soft brush, or dry
cloth. If available, use clean, dry, compressed air to blow through the ventilation holes
• Clean the tool casing with a soft damp cloth using a mild detergent. Do not use alcohol,
petrol or strong cleaning agents
• Never use caustic agents to clean plastic parts
Lubrication
• Slightly lubricate all moving parts at regular intervals with a suitable spray lubricant
Storage
• Store this tool carefully in a secure, dry place out of the reach of children
Air Belt Sander
silverlinetools.com
7