Rinse Holes Under The Agitator; If You Have Hard Water - grandimpianti GH6V Instrucciones De Funcionamento

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Care and cleaning

Rinse holes under the agitator

If you suspect that objects such as nails or paper
clips may have fallen into the wash drum, you
should check the space under the agitator. Such
objects can rust and cause spots on clothing.
Nails and other sharp objects can cause holes in
fabrics.
Do as follows:
1. Insert a screwdriver or the like into the hole on
the agitator as illustrated and carefully pry to
the left.
2. Use your other hand to grasp the agitator and
pull it towards you.
3. Lift the agitator.
4. Remove any objects.
5. Place the agitator in the mounting hole with the
F-mark towards you. Ensure that all the agitator
fasteners are in their holes in the drum. Push
it in until it catches.
Part 2 Serial number < B0005202999

If you have hard water

If you live in an area with hard water (high
limescale content), a greyish-white coating may
form on the wash drum. To remove this coating,
empty about 20gram of citric acid into the wash
drum and run any 95°C programme. Repeat if
necessary.
15

Publicidad

Tabla de contenido
loading

Tabla de contenido