Cleaning And Care - Beem CLASSIC SELECTION POUR OVER Guía De Usuario

EN

Cleaning and Care

NOTICE
The product is not dishwasher-safe.
•
• Do not use any toxic, corrosive or abrasive cleaning
agents or scouring sponges to clean the product. These
can damage the surface.
1. Empty the kettle completely.
2. Clean the kettle and the lid with warm water and a little
mild detergent.
3. All parts must be dry before you reassemble them and / or
store them away.
As well as cleaning the kettle after each use, you should
descale it at regular intervals. You will fi nd more informa-
tion on this in the following "Descaling" chapter.
Descaling
Limescale deposits have an adverse effect not only on the qual-
ity of the water, but they also cause power losses and shorten
the lifespan of the product. The thicker a limescale layer is, the
more diffi cult it is to remove.
We therefore recommend regularly removing limescale depos-
its with a descaling agent in accordance with the water quality
in your area and how often the product is used (approx. every
2 – 6 weeks).
The fi rst indications that descaling is required are a large amount
of steam being produced and slower boiling of the water.
22