8.2 Oven igniter
To replace the oven igniter, proceed as follows:
•
Empty the oven.
•
Remove the pan and the pilot flame peephole protection
•
Remove the lower faceplate (unscrew the 3 upper screws + 2 lower bolts).
•
Unscrew the mounting nuts from the igniter.
•
Remove the igniter.
•
Disconnect the cable from the igniter.
•
Install the new igniter.
8.3 Hob burner gas valve
To replace the gas valve, proceed as follows:
•
Remove all of the knobs
•
Remove the upper control panel.
•
Unscrew the nuts from the gas conduit, thermocoupling and those that attach
the valve to the power ramp.
•
Install the new valve.
•
Check for leaks!!!
9. PRIMARY PARTS LIST
Gas valve
Burner thermocoupling
Oven thermocoupling
Oven pilot
Heating elements for electric oven (series 700)
Heating elements for electric oven (series 900)
Switch for electric oven
Thermostat for electric oven
Safety thermostat for electric oven
p
art
c
ode
7060016
6010055
6010057
7090026
6001159
6001154
6030036
6010211
6010008
ENG
21