Led Indicator; Battery Charger - Dogtra 2600T&B Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

9. LED INDICATOR

The LED indicator flashes every 5 seconds when the
receiver is on and ready for use. The LED indicator will
blink on both the transmitter and the receiver when the
transmitter buttons are pressed.
The LED indicator color indicates the battery life level.
Green = Full charge
Amber = Medium charge
Red = Needs charge
If the unit is used while the LED indicator is red, it may
shut down automatically.
Receiver Indicator Light
When the Constant button on the transmitter is pushed,
the collar indicator light will glow steadily (either green,
amber, or red based on the remaining battery life), as
long as you hold the button down, for up to 12 seconds.
When the Nick button is pushed, the light comes on for
a fraction of a second.
62

10. BATTERY CHARGER

Charging Cable
Two-Dog Unit Only
The battery charger and charging cables allow you to
charge both the transmitter and receiver at the same
time. The battery charger is designed for a 230 volt wall
outlet (Also available: 10 volt car chargers for lithium
polymer batteries).
To use the battery charger for the two-dog unit,
combine both sets of charging splitter cables as shown.
This enables you to charge the transmitter and both
receivers at the same time.
Note: Only use Dogtra-approved lithium polymer
battery chargers for your Dogtra e-collar. This will
prevent any damage that can be incurred from
attempting to use a different charger.
230 Volt
Charger
Wall Outlet
63

Publicidad

Tabla de contenido
loading

Tabla de contenido