Eaton Powerware 9125 Guia De Instalacion página 18

INSTALLATION
7.
8.
9.
10. Continue to the following section, "Installing the UPS," to complete
6
EATON Powerware
Remove the adjacent corner screws from the rear panels as shown
in Figure 9 to install the joining brackets. Discard the screws.
Align each joining bracket with the screw holes and secure with the
screws provided in the accessory kit.
If installing additional EBMs, repeat Steps 7 and 8 for each cabinet.
the installation.
Joining Bracket
EBM
Joining Bracket
Figure 9. Installing the Joining Brackets
®
9125 (9910-P10, P11, P15, P16) UPS Installation Guide for IBM
UPS
® S
Applications 164201633 Rev A