Battery-Low Indication; Brush Head Replacement - Philips VisaPure Advanced Manual Del Usuario

16
English
2 Insert the small plug into the socket of the charging stand (1). Put
the adapter in the wall socket (Fig. 17) (2).
3 Remove the protection cap (Fig. 18).
4 Place the appliance upright into the charging stand, make sure
that it is placed properly (Fig. 19).
5 The charging light flashes white to indicate that the appliance is
charging. When the battery is fully charged, the charging light
lights up white continuously for 30 minutes (Fig. 20).

Battery-low indication

When the battery is almost empty, the charging light flashes amber
for 15 seconds. The battery still contains enough energy for a
complete treatment (Fig. 21).
Storage
- Store the appliance in the charging stand (Fig. 22).
- To store the appliance horizontally, place it on its anti-roll ridge
(Fig. 23).
- You can store the brush heads in the storage palette (Fig. 24)
(specific types only).
- If you are taking the appliance with you when you travel, put
the protection cap on the dry brush head to protect the brush
head filaments (Fig. 25).
Note: Never put the protection cap on a wet brush head.
- Put the appliance in the travel pouch (Fig. 26) (specific types
only).

Brush head replacement

Damaged brush heads or worn filaments could lead to skin irritation.
To ensure a hygienic skincare routine, we advise to replace the brush
heads every 3 months, or earlier if the filaments are deformed or
damaged. Replacement brush heads are available from our website
www.shop.philips.com or from the shop where you purchased your
Philips VisaPure Advanced. If you have any difficulties obtaining
replacement brush heads, please contact the Philips Consumer Care