Brandt TI2SLIM1 Manual De Instrucciones página 27

Problems
After plugging the machine in the indicator for the
Start/Stop key does not light up and there is no display
on the screen.
The Start/Stop key indicator light comes on but heating
does not start.
After use, the machine turns off and then a ventilation
noise is heard several times
The machine stops heating abruptly when it is
operating.
Display of error E0
codes
E1
E2
E3
E4
E5, E6
E1-E4
E0-E2-E5-E6
BRANDT FRANCE– Simplified Joint Stock Company with capital of 100.000.000 Euros
89/91 Boulevard Franklin Roosevelt – 92500 Rueil-Malmaison (France)
7 Points to be checked

Check the machine is correctly connected to the
electric socket.

Check that the switch, the plug and the fuse are in
good condition.

Make sure the that the pans are compliant with use
on induction hobs.

Make sure the that the pans are correctly placed on
the induction hob.

Call a help service.

The machine will stop the ventilation when the
temperature is lower than 60 degrees; depending on
the duration of use the ventilation may operate
several times.

Allow the machine to cool.

Clear the air inlet and outlet.

Adjust the timer again.

Refer to the error codes below.

The machine circuits are defective

The induction cooker has not detected a pan or the
pans on the induction cooker are not compatible

The induction cooker has overheated

The voltage is too high

The voltage is too low

Short circuit

Inspect the product to resolve the problem before any
other approach

Contact Customer Service
27