Connecting Your Cuff - A&D Medical LifeSource Cuff Guía De Instrucciones

CONNECTING YOUR CUFF

Once you have selected the correct air connector plug, refer to the
drawings below and complete the following steps:
1 .
Insert the cuff tube end of the air connector plug into the cuff
tube.
2 .
Insert the
monitor end of
the air connector
plug into the
digital blood
pressure monitor
air socket. You
will hear it snap
into the monitor.
NOTE: For UA-704 / UA-705 models, insert the bulb tube end of the air
connector plug into the bulb tube . The bulb and cuff tube ends of the
T-Connector plug are interchangeable .
3 .
When these connections
have been made, your blood
pressure monitor is ready
for operation.
NOTE: Refer to the Instruction
Manual that was included with your
monitor for operation information
E-4
LifeSource Health Line (Toll-Free): 1-888-726-9966
SYSTOLIC DIASTOLIC (PULSE)
DIGITAL BLOOD PRESSURE MONITOR
MEASURING
POWER
PRESS EXHAUST
RE-MEASURE
BATTERY LOW
RE-MEASURE
SYSTOLIC
mmHg
DIGITAL DIASTOLIC
BLOOD mmHg
PRESSURE
MONITOR
PUL / min
SYSTOLIC
mmHg
DIGITAL DIASTOLIC
BLOOD mmHg
PRESSURE
MONITOR
PUL / min