machine. Contact any Authorized Toro Service Dealer
to obtain the proper High Altitude Kit and high-altitude
label for your machine. To locate a dealer convenient to
you, access our website at www.Toro.com or contact our
Toro Customer Care Department at the number(s) listed
in your Emission Control Warranty Statement.
Remove the kit from the engine and restore the engine
to its original factory configuration when running the
engine under 1500 m (5,000 ft). Do not operate an engine
that has been converted for high-altitude use at lower
altitudes; otherwise, you could overheat and damage
the engine.
If you are unsure whether or not your machine has been
converted for high-altitude use, look for the following
label
(Figure
3).
Contents
Introduction .................................................................. 1
Safety ........................................................................... 2
General Safety......................................................... 2
Setup ............................................................................ 5
Guide................................................................. 5
Operation ..................................................................... 8
Operating Tips ......................................................15
Maintenance .................................................................18
Storage ........................................................................23
Safety
This machine has been designed in accordance with EN ISO
5395:2013 and ANSI B71.1-2012.
decal127-9363
General Safety
This product is capable of amputating hands and feet and
of throwing objects. Always follow all safety instructions to
avoid serious personal injury.
Using this product for purposes other than its intended use
could prove dangerous to you and bystanders.
•
Read and understand the contents of this Operator's Manual
before starting the engine.
•
Do not put your hands or feet near moving components
of the machine.
•
Do not operate the machine without all guards and other
safety protective devices in place and working on the
machine.
•
Keep clear of any discharge opening. Keep bystanders a
safe distance away from the machine.
•
Keep children out of the operating area. Never allow
children to operate the machine.
•
Stop the machine and shut off the engine before servicing,
fueling, or unclogging the machine.
Improperly using or maintaining this machine can result
in injury. To reduce the potential for injury, comply with
these safety instructions and always pay attention to the
safety-alert symbol, which means Caution, Warning, or
Danger-personal safety instruction. Failure to comply with
these instructions may result in personal injury or death.
You can find additional items of safety information in their
respective sections throughout this manual.
2