Starting The Engine - Toro Super Recycler 20381 Manual Del Operador

Starting the Engine

You can start the engine using either the electric-start button
or the recoil-start handle.
Starting the Engine Using the
Electric-Start Button
Electric-Start Model Only
1. Hold the blade-control bar against the handle
16).
1. Blade-control bar
2. Push the electric-start button until the engine starts
(Figure 17).
Note: If the electric-start button has been removed,
insert it in the electric starter; refer to
2
1
1. Electric starter
2. Electric-start button
Figure 16
Figure
3
G020174
Figure 17
3. Electric-start button
(installed)
Note: If the machine does not start after several
attempts, contact an Authorized Service Dealer.
Starting the Engine Using the
Recoil-Start Handle
1. Hold the blade-control bar against the handle
18).
(Figure
1. Blade-control bar
g009546
2. Pull the recoil-start handle
17.
Note: When you pull the recoil-start handle, pull it
lightly until you feel resistance, then pull it sharply
(Figure
slowly.
Note: If the machine does not start after several
attempts, contact an Authorized Service Dealer.
g020174
11
Figure 18
(Figure
Figure 19
19). Allow the rope to return to the handle
(Figure
g009546
19).
g009548