Alpha Mode (Alpha-Track Monitor) - Denon DN-S5000 Instrucciones De Operación

8

ALPHA MODE (Alpha-Track Monitor)

This function lets you play the Alpha-Track from ALPHA OUT while playing the Main Track. Using this function,
you can prepare the next song on same CD before the end of your first track. While in Alpha-Mode, Alpha-Track's
output can be monitored through your mixers headphone.
Therefore, you can switch between the Alpha-Track and Main Track at any time, so two tracks on the same disc
can be played continuously with no break in the sound.
e
r
Enter Alpha-Mode
q Push the a MODE button to
MIRROR MIX
enter Alpha Mode.
• When alpha-cue is not
set, alpha-cue is set at
the beginning of the
Main Track.
1
NOTE:
Before entering the Alpha-Mode, Samplers
1 and 2 (A3, A4 buttons) must be in the
STOP mode otherwise the DN-S5000 will
not accept the ALPHA-MODE command.
✽ In the Alpha-Mode, illumination of a
MODE button flashes.
q, t
w
Monitor the Alpha-Track
• You can execute many functions almost
same as for the Main Track except, Program,
Random. Without these functions you can
prepare preferred sound and mixing point.
• In Alpha-Track mode, the display information
2 is dominated by Alpha-Track.
✽ Memo Call
w If the Hot Start, Seamless Loop and other
data for the track to be used next is stored
in the memory, the settings for the track
to be played can be made easily using the
memo call function.
Switching Alpha-Track and Main Track
• After you prepared your Alpha-Track, you
can switch the sound between Alpha-Track
and Main Track.
e When your Main Track is Cued in Alpha-
Mode, CUE button illumination flashes
rapidly. At this time you can switch
between Alpha-Cue point and main Cue
point, then CUE button stops flashing and
waits for your next command.
r When Main Track is playing and then Alpha-
Mode + Alpha-Track is selected, the main
13
button illumination flashes rapidly.
3
At this time you can
switch (slam-mix) to
force the " MAIN OUT"
to stop and the Alpha-
Track to start by simply
13
pushing the main
button.
The sound from Alpha-Cue point is routed
13
to MAIN OUT, then button stops
flashing.
✽ After Alpha-Track changed to Main Track,
Alpha-Mode ends automatically and a
MODE button illumination turns off. You
can repeat the cycle again.
Pitch after switching
• Pitch of Alpha-Track can be changed
separately from the Main Track. This causes
the playback pitch to be different from the
Pitch Slider setting after switching to Alpha-
Track because the Pitch Slider was set
4
originally for your Main Track.
• In this case, PITCH LED flashes to warn that
the Pitch Slider setting is different. Only until
the position of the Pitch Slider matches its
correct pitch of your Alpha-Track will the
PITCH LED stop flashing and start changing
with the Pitch Slider.
Exit from Alpha-Mode
MIRROR MIX
t You can exit from Alpha-
5
Mode with push a MODE
button.
Hot Start, Sampler
• Hot Start and Sampler setting with A1, A2,
6
A3, A4 are available as Hot Start in Alpha-
Mode.
ENGLISH
15