Product Specifi cations
Material of Construction
Membrane Support
Capsule Shell
Edge Seal
Luer Cap and Barb Connectors
Approximate Volume
Capsule Fill Volume
2
Holdup Volume Post Blow Down
3
Pre-use Sterilization and Sanitization
Autoclave Sterilization
(Only 1 autoclave cycle)
Base Sanitization
(Only 1 base sanitization cycle)
Post-use Sterilization and Sanitization
Autoclave Sterilization
Sanitization
Required Preconditioning Flush Volume
Flush Volume, No Pre-treatment
Flush Volume, Post-autoclave
Flush Volume, Post Base Sanitization -
50 mM phosphate buff ered saline at pH 7.4
BV8R Luer
EMP301AEX020R
Polypropylene Nonwoven
13 mL
121°C for 30 minutes using Pre-vac cycle
1M Sodium Hydroxide (NaOH) for 60 minutes
Post use 1 autoclave cycle at 126°C for 30 minutes
1M Sodium Hydroxide (NaOH) or 5% Bleach (NaClO) for post-use sanitization
4
5
- 7 -
BV8R Sanitary
EMP303AEX020R
Polypropylene
Filled Polypropylene
Polypropylene
16 mL
9 mL
130 mL
130 mL
130 mL