Using Tools; Carpet/Bare Floor Selector - Panasonic MC-UG693 Instrucciones De Operación

Crevice Tool
Suceur plat
Herramienta
para
hendiduras
Telescopic Wand
Rallonge
télescopique
Tubo telescópico
Dusting Brush
Brosse à
épousseter
Cepillo para
sacudir
Combination Brush
Brosse combinée
Cepillo para combinación
Swivel
Pivotant
Giratoria

Using Tools

➢ ➢ Place the carpet/bare floor selector
Stretch Hose
Tuyau
extensible
Manguera
NOTE: When returning the bare floor
expansible
selector to the carpet setting, use
caution as the selector can move
quickly to that setting due to tension
Hose Collar
created by the belt.
Collier de
tuyau
Collar de ➢ ➢ Identify each of the attachments
manguera
➢ ➢ Remove the lower end of the stretch
➢ ➢ The attachments can now be added
➢ ➢ The attached hose swivels to make
➢ ➢ Remove the hose from the hose clip
NOTE: The motor protector may open
when using attachments or when
cleaning new carpet, due to reduced
airflow by the attachments themselves
or by new carpet fuzz filling the dust
bin quickly. See the
TROUBLESHOOTING section.
- 22 -
in the bare floor setting by rotating
the selector back and down to the
bare floor setting. See

CARPET/BARE FLOOR SELECTOR

section.
shown.
hose from the vacuum cleaner by
grasping the hose collar, twisting
and pulling straight out.
to the hose.
cleaning easier in every direction.
by pulling straight out.
CAUTION
Do not allow vacuum cleaner to remain
in one spot for any length of time when
the agitator is turning. Damage to carpet
may occur.