Carpet-Bare Floor Selector; Edge Cleaning - Panasonic MC-UG693 Instrucciones De Operación

Carpet/Bare Floor Selector
Sélecteur tapis/plancher
Selector de pisos con
alfombra y sin alfombra
To Clean Bare
Floor Or Use
Tools
Position plancher
ou avec accessoires
Para aspirar sobre un suelo
sin alfombra o usar los accesorios
Carpet/Bare Floor Selector
To Clean Carpet
Position tapis
Para aspirar sobre
una alfombra

Edge Cleaning

- 30 -
➢ ➢ Selector should be placed in BARE
FLOOR (TOOLS) position when
using vacuum cleaner on bare
floors and when using tools.
➢ ➢ The agitator does not rotate in the
BARE FLOOR (TOOLS) position.
➢ ➢ Selector should be placed in
CARPET position when using
vacuum cleaner on carpeted floors.
➢ ➢ For longer belt life, turn vacuum
cleaner off before moving selector.
➢ ➢ Otherwise, take care when selecting
either position to ensure selector is
pushed as fully and quickly as
possible to desired position.
➢ ➢ Failure to do so can cause belt to
rub on selector shaft and result in
belt becoming hot and creating a
burning rubber smell.
➢ ➢ Edge cleaning feature enables
improved cleaning of carpets near
walls and furniture.