Removing Clogs - Panasonic MC-UG693 Instrucciones De Operación

Stretch Hose In and Out
Étirer et relâcher le tuyau
Extienda y afloje la manguera

Removing Clogs

Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the vacuum
cleaner. Failure to do so could result
in electrical shock or personal injury
from vacuum cleaner suddenly
starting.
Always follow all safety precautions
when cleaning and servicing the
vacuum cleaner.
➢ ➢ If the vacuum cleaner does not
seem to have adequate suction, first
check if the dust bag is full or if a
filter is clogged. See DUST BAG
CHANGING and FILTER CHANGING.
➢ ➢ If the bag and filter areas are free of
clogs, check the hose area.
➢ ➢ Remove the lower end of the stretch
hose from the vacuum cleaner by
grasping the hose collar, twisting,
and pulling straight out.
➢ ➢ Plug in the vacuum cleaner and turn
it on.
➢ ➢ Stretch the hose to maximum length
and then allow the hose to return to
its storage length.
➢ ➢ Turn off and unplug the vacuum
cleaner.
➢ ➢ Visually inspect the hose and the
base area into which the hose is
inserted.
➢ ➢ Remove any visible clog.
- 62 -
WARNING