Mode Conversion; To Convert Weight Unit; To Start Weighing - Baxtran STEELKS Manual De Instrucciones

5. MODE CONVERSION

After turning on scale, press MODE button to select mode as shown below:
The unit system of scale depends on scale destination or the requirement of distributor

6. TO CONVERT WEIGHT UNIT

If the scale with both unit systems of metric (g,ml) or Imperial (lb:oz.fl'oz) press MODE bottom to choose working mode (weight, milk volume,
water volume) then press UNIT conversion button to convert between two systems. Take the conversion of weight unit for example:
When setting g as weight unit, the default volume unit is ml;
When setting lb: oz as weight unit, the default volume unit is fl'oz.
The unit system of scale depends on scale destination or the requirement of distributor

7. TO START WEIGHING

1. Weighing mode
A. Place the scale on a solid and flat surface.
B. Place bowl (if used) on the scale.
C. Press to turn on.
D. Wait until LCD shows "0".
Press MODE button to convert to weiguing mode.
E. Load weighing object on scale (or bowl) to start weighing.
LCD will show the weight reading.
F. If the weighing object is water or milk, press MODE button
to choose volume mode and view the volume of weighing object.
Remark:
Remark:
USER MANUAL STEELKS EN
9