Intended Use - Worx WG894E Traducción De Las Instrucciones Originales

Sierra de mano inalámbrica
Ocultar thumbs Ver también para WG894E:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 40
SYMBOLS
To reduce the risk of injury, user
must read instruction manual.
Warning
Wear eye protection
Wear ear protection
Wear dust mask
Do not expose to rain or water
Do not burn
10
Do not dispose of batteries. Return
exhausted batteries to your local
collection or recycling point.
Waste electrical products must not
be disposed of with household
waste. Please recycle where
facilities exist. Check with your
local authorities or retailer for
recycling advice.
xINR18/65-y: Cylindrical lithium
Ion battery cells with max diameter
of 18mm and max height of
65mm; "x" represents a number
cells serial connected, blank if 1;
"-y" represents a number of cells
paralleled connected, blank if 1.
Cordless Li-Ion handy saw
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.

INTENDED USE:

The machine is intended for sawing wood,
plastic, soft metal and building materials while
resting firmly on the workpiece.
ASSEMBLY
REPLACING/INSERTING THE SAW BLADE
Remove the battery pack from the
socket before carrying out any
adjustment, servicing or maintenance.
When mounting the saw blade, wear
protective gloves. Danger of injury when
touching the saw blade. When changing the
saw blade, take care that the saw blade holder
is free of material residue, e. g. wood or metal
shavings.
1. SELECTING A SAW BLADE (See Fig. A)
NOTE: Only use maximum blade lengths
specified in table below for the intended
purpose of application. Failure to adhere
to this advice will result in damage to the
product and void of warranty.
Pruning blade (152mm,
6TPI, 65Mn)
Bi metal blade
(152mm, 18TPI, HSS)
2. INSERTING A SAW BLADE (See Fig. B)
Remove the battery pack from the
socket before carrying out any
adjustment, servicing or maintenance.
Pull down the tool-free blade clamp lever (6),
Insert the blade shank into the blade holder
until it stops. Release the clamp lever (6) to
lock the blade (7/8) in position.
Check the tight seating of the saw blade.
A loose saw blade can fall out and lead to
injuries.
Typical application
Garden limbs, etc.
Metals and wood
,etc.
EN

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Wg894e.5Wg894e.9

Tabla de contenido