Unox ChefLux Manual Instrucciones página 9

ENGLISH
"START / STOP" key
The "START / STOP" key has to be used when
you want to start the cooking. Furthermore, it
can to be used when you want to pause the
appliance: to continue the cooking program
from the point it stopped, press again START
/ STOP.
When the oven is working the led is lit up. When
the oven is turned on, but it is not working, the
led is turned off.
"+1" key
When the oven is working in the manual ver-
sion, every time you push this key you add 1
minute to the total set cooking time.
When you use the oven in the digital version
and you are using the saved programs, this
key can be used only at the end of the last
time period. Every time you push it, you add 1
minute to the cooking time and this minute has
the same characteristics (temperature, steam,
etc.) of the last time period.
"LIGHT" key
When you briefly press this key, you turn the
oven light on for 30 seconds. Once the 30
seconds are passed, the light turns off.
If you press this key for 3 seconds, you turn
the oven light on and it remains on until you
press again the key. After you press the key the
second time, the light turns off.
Storage and use of the programs
The oven is preset to save 70 cooking pro-
grams.
Procedure to save a program:
1- Using the knob you find on the lower part of
the control panel, set the number you want
to give to the program;
2- Set all the different inputs that have to be
used in the 4 different cooking phases;
3- Save the program keeping pressed for 5
seconds the "MEM PROG" key.
Procedure to use a saved program:
1- Using the same knob you used to set the
number of the program when you were
saving it, set the number of the program you
want to use;
2- Start the program pushing the "START /
STOP" key.
Procedure to change a saved program:
1- Using the same knob you used to set the
number of the program when you were
saving it, set the number of the program
you want to modify;
2- Change the input you want to modify;
3- Save the program pushing the "MEM
PROG" key for 5 seconds;
Automatic pre-heating
The pre-heating function works only when you
are using programs.
When you start up the oven with START PROG,
the oven starts to heat up the cooking chamber
but you do not see anything on the display;
when the oven reaches the pre-heating tem-
perature , it advises you with a continuous
sound.
When you hear this sound, you can put the
food in the oven. Then close the door and the
selected program automatically starts. All the
displays show the used inputs.
"ON / OFF" key
The "ON / OFF" key turns the oven on and off.
When the oven is off the respective led is lit up
and shows you there is power available.
"OVEN / PROVER" key
(available only if you have a digital prover)
The digital control panel allows you to control
both the oven and the digital prover at the same
time. This means that the oven and the prover
can work at the same time. If you push the
"OVEN / PROVER" key while they are working,
8
ENGLISH