SEVERIN HAIR CARE HT 0130 Instrucciones De Uso página 10

Ocultar thumbs Ver también para HAIR CARE HT 0130:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 18
as well as
- in cases of malfunction, and
- during cleaning.
When removing the plug from the wall
socket, never pull on the power cord;
always grip the plug itself.
Do not operate the appliance when it is
stored on the hanging loop.
Do not place the appliance on any surfaces
sensitive to heat during or immediately after
use.
This appliance is not intended for use by
any person (including children) with
reduced physical, sensory or mental
capabilities, or lacking experience and
knowledge, unless they have been given
supervision or instruction concerning the
use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure
that they do not play with the appliance.
Caution: Keep any packaging materials
well away from children, as they are a
potential source of danger e.g. from
suffocation.
No responsibility will be accepted if damage
results from improper use, or if these
instructions are not complied with.
This appliance is intended for domestic use
only and not for commercial applications.
In order to comply with safety regulations
and to avoid hazards, repairs of electrical
appliances must be carried out by qualified
personnel, including the replacement of the
power cord. If repairs are needed, please
send the appliance to one of our customer
service departments. The addresses can be
found in the appendix to this manual.
The IONIC function
The IONIC function facilitates gentle, easy hair
styling by preventing a static charge in the hair.
It uses the build-up of a negative 'ion-cloud' to
prevent 'flyaway' hair caused by a positive
charge. The Ionic function can be enabled by
moving the slide switch to the left and is shown
by the red indicator light.
Styling nozzle
The styling nozzle can be attached to the air
outlet grille. Its concentrated air-stream
facilitates the exact shaping of the hair.
Volume diffusor
The volume diffusor is also fitted to the air
outlet.
The volume diffusor is used to maintain the
volume of the hair. Move the diffusor with a
slightly circular motion over the head.
Air-flow and temperature controls
By using different combinations of the air-flow
and temperature controls, various settings are
possible when drying the hair.
The air-flow control regulates the air-flow
intensity, while the temperature control
regulates the heat of the air-flow.
With the air-flow control set to the '0'-position,
the hair-dryer is switched off.
Cool function
The cool function can be used at any time
during the drying process. It will supply cooler
air, which helps firming and shaping the hair.
Operation
Connect the hair dryer to a suitable wall socket
and select the desired power setting with the
switches integrated in the handle.
Cleaning and care
Before cleaning the hair dryer, remove the
plug from the wall socket and let the
appliance cool down completely.
To avoid the risk of electric shock, do not
clean the hair dryer with water nor immerse
it in water.
- If necessary, the housing of the hair dryer
may be wiped with a dry lint-free cloth.
- Always check the air intake openings for
accumulated lint particles or hair and - if
necessary - remove any found.
To facilitate cleaning, the grille on the air
intake can be removed by turning it anti-
clockwise and then lifting it off. After
10

Publicidad

Tabla de contenido
loading

Tabla de contenido