Silk’n BellaFlash Pro Manual Del Usuario página 14

8.4 Device sensors
Your Silk'n BellaFlash Pro has three sensors. for touch, movement, and color.
U
EN
U
M
8.5 What to expect when treating with Silk'n
For many people, using Silk'n BellaFlash Pro may be their first experience with a
light-based device. During a treatment session it is normal to experience or feel:
U
U
U
U
E
E
Flash&Go Pro BellaFlash Pro UM NA 2102B inside ED131-01.indd 14
Touch and Movement: The device will only emit repeated
pulses when it is in firm contact with your skin, and you keep
moving it across your skin.
Color: Light-based hair removal on darker skin tones may
result in adverse effects such as burns, blisters, and skin color
changes (hyper- or hypo-pigmentation). Your Silk'n BellaFlash
Pro has a skin color sensor that detects the color of your skin
automatically. The skin color sensor checks your skin color at the
start of, and occasionally during, each treatment.
If Silk'n BellaFlash Pro detects that your skin tone is dark, and the
energy level is set to 3 or higher, the device will auto-adjust and
set the energy level back to 2.
Noise: The cooling fan makes noise similar to a hair dryer. This
is normal.
A popping sound: With each flash of HPL™ light.
A sensation of warmth and tingling: During each light
pulse.
Some redness: It is not uncommon to see some very mild,
pink-like skin coloration during or just after a treatment. This is
usually most noticeable around the hairs themselves.
Stop use immediately if you see your skin is very red.
Contact your physician immediately, if you experience any
complication.
14
20/03/2017 11:52:23