After Treatment; Maintenance - Silk’n BellaFlash Pro Manual Del Usuario

9.
E

10. After treatment

When you have finished your treatment session:
1.
2.

11. Maintenance

It is important to clean your Silk'n BellaFlash Pro device after each treatment. To
clean the device:
L
L
L
E
Flash&Go Pro BellaFlash Pro UM NA 2102B inside ED131-01.indd 17
If you are pulsing, repeat the process. If you are gliding, simply continue.
Continue to pulse or glide until you have treated the area fully.
Stop use immediately, if your skin blisters or burns.
Turn the device off by giving the control button an extended press.
Remember the last energy level setting you used, because it will not be
restored when you turn the device on again.
Remove the adapter from the electrical outlet.
Unplug the device.
To clean the device including the treatment surface, wipe with
a clean, dry cloth. Never use acetone or other abrasive fluids,
because they will damage your device.
After cleaning, we recommend you store the device in its
original box.
Never immerse your Silk'n BellaFlash Pro or any of its parts
in water.
17
EN
20/03/2017 11:52:23