The Telephone Network; Setting The Display Language; Setting The Display Contrast - Avaya T3 Standart Manual De Manejo

Ocultar thumbs Ver también para T3 Standart:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Familiarizing Yourself with the Telephone
Starting Up
Continued
Starting up / Restarting after a longer period disconnected from the telephone
network
Your telephone is equipped with an automatically charging energy store which is
continuously charged when the equipment is in use. When starting up for the first
time or after more than 3−4 weeks disconnected from the telephone network (e.g.
in the case of a power failure or moving location), the energy store must be charged
in order for the telephone to work.
Place the receiver beside the telephone.
Connect a plug at the end of the telephone line cable to socket 1. Then press the
cable in the guide.
Insert the plug at the other end of the telephone line cable in the wall socket /
connection socket (UAE).
The energy store is now started automatically. The receiver must not be placed
on hook!
The telephone is ready to operate after about 20 seconds. Check whether the
dialling tone can be heard in Handsfree mode [H].
The indicators in the display are all fully visible after approx. 90 seconds (check the
contrast setting, if necessary), the telephone is now ready for use.

Setting the display language

$
When the receiver is on−hook, press and hold the
button for approx. 4 seconds.
*
ENGLISH
appears in the display.
D
C
Press
to select the required language and confirm by pressing
. The
hour display then flashes.

Setting the display contrast

When the receiver is on−hook, press the D button to set the display contrast to
one of four settings.
37

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

T3 standard

Tabla de contenido