Interlogix TruVision IP Guia De Inicio Rapido página 10

Refer to the User Manual for detailed information on configuring the
cameras. See Table 1 on page 10 for an overview of the configuration
parameters.
Note: The On-screen display (OSD) menus are in English only.
Table 1: Overview of the configuration parameters
Configuration folders
Local configuration
Basic information
Channel parameters
Network parameters
Serial settings
Alarm parameters
Deployment time
User management
HDD management
Remote upgrade
Default
Reboot device
EN 10
Description
Defines the network type, display mode and
local storage paths.
Defines the camera name and RS-485 bus
ID. This screen also displays the MAC
address, device type, device SN and the
current firmware version.
Defines the OSD properties of camera
information, recording parameters and
schedules, motion detection parameters,
image quality, alarm responses, and overlay
text.
Defines the network parameters required to
access the camera over the internet.
Defines the RS-485 and RS-232
communication settings.
Defines how the camera handles alarms
such as input type, notification of alarms,
and response schedules and duration.
Defines the schedules during which events
are registered.
Defines who can use the camera, their
passwords and access privileges.
Defines how to format the SDHC card used
in the camera.
Defines how to upgrade the camera's
firmware.
Restores default settings.
Reboots the camera.
Quick Start Guide