Interlogix TruVision IP Guia De Inicio Rapido página 6

1. Ground. Connect to ground.
2. Ethernet RJ45 PoE port. Connect to network devices.
3. Audio output. Connect to an audio output. Line level, 600 Ω.
4. Initial set. Press to hard reboot camera.
5. Audio input. Connect to an audio input. 2.0 to 2.4 Vp-p, 1 kΩ.
6. RS-485 D+, D-. Connect to an RS-485 device such as a PTZ dome
camera.
7. Alarm outputs. Connect 1A/1B and 2A/2B to alarm output devices.
8. Alarm inputs. Connect IN1/GND and IN2/GND to alarm input
devices.
9. Power supply. Connect +12 VDC power supply.
10. SDHC card slot.
11. RCA video output connector.
12. Lens adjustment screw.
13. Video cable for testing (supplied).
Wedge dome cameras:

Wedge dome camera connections
EN 6 Quick Start Guide