Removing The Secure Router 4134 Internal Pvm - Nortel Networks 2330 Manual Del Usario

5 Install the access panel onto the Secure Router 4134.
6 Install the two screws that secure the service access panel to
the Secure Router 4134.

Removing the Secure Router 4134 internal PVM

Use the procedure in this section to remove a PVM from the Secure
Router 4134.
•
Ensure the Secure Router 4134 has the power switched off. You
cannot hot swap internal components.
•
Ensure you have a Phillips #2 screwdriver.
•
Ensure you have an antistatic bag or sheet available for the PVM that
you are removing.
Procedure steps
Step Action
1 Remove the Secure Router 4134 service access panel. SSee
Removing the Secure Router 4134 service access panel.
Nortel Secure Router 2330/4134
Regulatory Information
NN47263-106 01.01 18 September 2009
Copyright © 2009- Nortel Networks. All Rights Reserved.
Secure Router 2330/4134 modules 37
--End--