Nortel Networks 2330 Manual Del Usario página 40

40 English
WARNING
Installation must be performed by qualified service personnel
only. Read and follow all warning notices and instructions
marked on the product or included in the documentation.
WARNING
This product relies on the building installation for overcurrent
protection. Ensure that a fuse or circuit breaker no larger than
120 V AC, 15 A U.S. (240 V AC, 10 A international) is used on
the phase conductors.
CAUTION
This device is a Class A product. In a domestic environment,
this device can cause radio interference, in which case the user
may be required to take appropriate measures.
CAUTION
When mounting this device in a rack, do not stack units directly
on top of one another in the rack. Each unit must be secured to
the rack with appropriate mounting brackets. Mounting brackets
are not designed to support multiple units.
WARNING
Disconnecting the power cord is the only way to turn off power
to this device. Always connect the power cord in a location that
can be reached quickly and safely in case of an emergency.
DANGER
Ensure that you remove the proper amount of insulation from
copper wires when installing the terminals (lugs). Ensure that
there are no exposed wires.
CAUTION
To reduce the risk of fire, use only number 26 AWG or larger
UL Listed or CSA Certified Telecommunication Line Cord for all
network connections.
Nortel Secure Router 2330/4134
Regulatory Information
NN47263-106 01.01 18 September 2009
Copyright © 2009- Nortel Networks. All Rights Reserved.