Setting Mode; Automatic - Bolt Direction Determination - Gate House G27D01 Manual Del Usuario

SETTING MODE

AUTOMATIC - BOLT DIRECTION DETERMINATION

1. Install four ALKALINE Batteries.
2. Press [SET] button for more than 2 seconds.
The red LED will light and the lockset will beep twice.
You are now in programming mode.
3. Enter 123456 (or current programming code) and then press
and then press
The red LED will light continuously for 10 seconds. The lock will have the bolt
direction set.
button.
OFF ON
DEL
SET SET
AUTO LOCK
20
button. Enter [00]
1 2 3
4 5 6
7 8 9
C 0