Preparation - Gate House G27D01 Manual Del Usuario

PREPARATION

Before beginning installation of product, make sure all parts are present.
Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble, install or operate the product.
ESTIMATED ASSEMBLY TIME: 40 - 60 MINUTES
TOOLS NEEDED FOR NEW INSTALLATION (NOT INCLUDED):
• Pencil
• Chisel
• Tape Measure
• Hammer
• Phillips Screwdriver
• 1 in. (25 mm) and1/8 in. (3 mm) Drill Bits
• 2-1/8 in. (54 mm) Hole Boring Bit
• Power Drill
• 2 in. (51 mm) 6d Common Nail
• Flathead Screwdriver
03