Gate House G27D01 Manual Del Usuario página 6

PREPARATION
1. MARK DOOR WITH TEMPLATE (REFER TO PAGE 36, 37)
a. Use TEMPLATE to mark centerline on door for keypad deadbolt about
3 in. (76 mm) to 6 in. (152 mm) above the existing knob or lever.
b. Face door swings to align and fold template as shown.
Mark door edge approximately
3 in. (76 mm) to 6 in. (152 mm)
above the entry knob or lever.
NOTE: If replacing an existing lock or installing in a pre-drilled door, please start from page 08.
For new installation, which requires the door to be drilled, please start from page 04.
Template
Centerline
04
or