Setting Mode; Delete All Existing User Codes At Once - Gate House G27D01 Manual Del Usuario

SETTING MODE

DELETE ALL EXISTING USER CODES AT ONCE

1. Press [SET] button for more than 2 seconds.
The red LED will light and the lockset will beep twice.
You are now in programming mode.
2. Enter 123456 (or current programming code) and then press
and then press
The lockset will beep once and the green light will be on.
The red LED will light continuously for 10 seconds.
All existing user codes are successfully deleted.
button. Press button for more than 3 seconds.
C
OFF ON
DEL SET SET
AUTO LOCK
24
button. Enter [40]
3
1 2
4 5 6
7 8 9
0
C