Timex Intelligent Quartz W273 Manual Del Usario página 15

FlY-BACk CHronoGrAPH
The watch provides a 4-hour fl y-back chronograph.
1. To start, press A (START/STOP). The 4th center hand
shows the seconds with 1/5-second resolution and
the lower hand shows
the last digit of the
minutes, counting up
to ten and repeating.
The upper hand shows
the total time, includ-
ing hours and minutes,
with divisions every
ten minutes. The chro-
nograph counts up
to four hours before
stopping automatically.
1
24
2. To stop, press A again (START/STOP). All hands freeze.
3. To resume, press A (START/STOP) again, or to reset the
4. You may also reset and/or restart the chronograph
1 2 3
2
3
chronograph to zero, press B (FLY-BACk/RESET).
When the chronograph is reset, all hands move to
zero. After eight seconds, the watch resumes the
normal display of the second time zone time.
while it is running. To do so, press and hold B (FLY-
BACk/RESET) to zero the chronograph and release it
when you wish to restart. You do not have to wait for
all hands to reach zero before releasing the button;
the timing will start internally from the button release.
This "fl y-back" feature allows you to measure lap time.
The compass may be used while the chronograph is
running without interfering with its operation. See
COMPASS OPERATION.
25