Timex Intelligent Quartz W273 Manual Del Usario página 29

4. When done, press C (Compass), keeping the watch
level. The 4th center hand moves back and forth to
acknowledge the end of calibration and then moves to
the current magnetic declination setting.
5. If you do not wish to set the magnetic declination,
push the crown in. Otherwise, to have watch
automatically compensate for the declination angle,
turn the compass ring until north is at 12 o'clock.
6. Press A or B to move the 4th center hand west (-)
or east (+), respectively, to point to your location's
declination angle using the declination scale. Hold a
button to move the hand quickly. See the fi gure below
for an example.
7. Push the crown in when done.
52
Magnetic declination set to -14° (14°W)
CoMPASS oPErATIon
Normally, the compass is inactive, with the 4th center
hand pointing to 12 o'clock or showing the chronograph
seconds.
While holding the watch level, press C (COMPASS) to
activate the compass. The compass hand moves to
point north. If the watch is turned, the 4th center hand
will continue to move, always pointing north. After 20
seconds, the compass will automatically turn off and the
53