Lcd Display; Basic Operations; Turning The Unit On And Selecting A Source; Adjusting The Volume - Pioneer DEH-1950 Manual De Operación

Operating this unit

LCD display

1
3
1 Main display section
Shows the various information such as
band, play time, and other setting.

! Tuner

Band and frequency are displayed.
! Built in CD Player
Erapsed play time is displayed.
! Audio and initial setup
Function names and setup status are dis
played.
2 Preset number/track number indicator
Shows the track number or preset number.
! If a track number 100 or more is selected,
d on the left of the track number indica
tor will light.
3 RPT indicator
Shows when repeat play is turned on.
4 LOUD indicator
Appears in the display when loudness is
turned on.
5 Stereo (5) indicator
Shows when the selected frequency is
being broadcast in stereo.
6 LOC indicator
Shows when local seek tuning is on.

Basic Operations

Turning the unit on and
selecting a source
You can select a source you want to listen to.
To switch to the built in CD player, load a disc
in the unit (refer to the next page).
% Press SOURCE to select a source.
Press SOURCE repeatedly to switch between
the following sources:
2
Tuner Built-in CD player AUX
! In the following cases, the sound source will
4 5 6
! AUX is set to on by default. Turn off the AUX
! When this unit's blue/white lead is connected

Adjusting the volume

% Use VOLUME to adjust the sound level.

Turning the unit off

% Press SOURCE and hold until the unit
turns off.
Tuner

Listening to the radio

If you are using this unit in North, Central or
South America, reset the AM tuning step (see
Setting the AM tuning step on page 9).
1
2
Press BAND until the desired band (F1, F2, F3
for FM or AM) is displayed.
3
c or d.
Black plate (5,1)
Notes
not change:
When there is no disc in the unit.
When the AUX (auxiliary input) is set to off
(refer to page 9).
when not in use (refer to Switching the auxili
ary setting on page 9).
to the vehicle's auto antenna relay control
terminal, the vehicle's antenna extends when
this unit's source is turned on. To retract the
antenna, turn the source off.
Important
Press SOURCE to select the tuner.
Press BAND to select a band.
To perform manual tuning, briefly press
<CRD4146 A/N>5
Section
02
5
En