GYS GYSMATIC 9/13 AIR TRUE COLOR XL Instrucciones De Seguridad página 14

UNPACKING
Make sure that the packaging is intact and that no parts were damaged during transport. Check that the device is complete, in working order and
properly assembled. The faulty/damaged parts must be replaced before use.
FIXING THE RESPIRATORY SYSTEM ON THE BELT
1
Remove the belt's release buckle.
3
Make the fastening belt pass through the respiratory system's 2
5
Flip the filtration system and attach the Velcro
7
14
GYSMATIC 9/13 XL • 5/13 XXL
The package must include :
1. The air fed welding + welding hood
2. the respiratory protection system (motor + filter + waist belt)
3. lithium-ion battery
4. the air hose, its anti-fire cloth and both end fittings
5. the shoulder harness
6. the air flow tester
7. the lithium-ion battery charger
8. the carrying bag (only for GYSMATIC 5/13 XXL)
9. 2 instruction manuals (helmet + respiratory system)
belt loops.
on the belt.
®
Put the buckle back
2
Remove the fastening belt from the waist connector's 2 belt loops.
4
Position the Velcro
6
Put the fastening belt back through the 2 belt loops.
8
Attach the harnesss to the belt's 4 plastic rings.
EN
between the 2 loops.
®