Pulsar ACCOLADE 2 LRF Manual Del Usuario página 12

Reset Restore default settings
Press and hold down the М (3) button to enter the
=
main menu.
Select option «Settings» with the UP (2)/DOWN
=
(5) buttons. Press briefly М to confirm.
Select option "Reset" with UP/DOWN. Press
=
briefly М to confirm.
With a short press of the UP/ DOWN buttons
=
select «Yes» to restore default settings or «No»
to abort.
Confirm selection with a brief press of the M
=
button.
If «Yes» is selected, display will show «Return
=
default settings?» and «Yes» and «No»
options. Select «Yes» to restore default settings.
If «No» is selected, action is aborted and you
=
return to the submenu.
The following settings will be restored to their
original values before changes made by the user:
Operating mode of video recorder – video
=
Unit's operating mode – Forest
=
Calibration mode – automatic
=
Language – English
=
Wi-Fi – off (default password)
=
Magnification – off (no digital zoom)
=
PiP – off
=
Colour palette – White Hot
=
Unit of measurement - metric
=
Warning: date and time settings, default pixel map
and remote control activation are not restored.
Formatting
Format
This menu option allows you to format your device's
Flash card or memory card (erase all files from its
memory).
Press and hold down the М (3) button to enter the
=
main menu.
Select option «Settings» with the UP (2)/DOWN
=
(5) buttons. Press briefly М to confirm.
Enter the Format submenu with a short press of
=
the M button.
Press briefly М to confirm.
=
With a short press of the UP/ DOWN buttons
=
select «Yes» to format the memory card or «No»
to return to the submenu.
Confirm selection with a short press of the M
=
button.
If «Yes» is selected, display will show «Do you want to format
=
memory card?» and «Yes» and «No» options. Select «Yes» to
format the memory card.
Message «Memory card formatting» means that formatting is in
=
progress.
Upon completion of formatting the message «Formatting
=
completed» is shown.
If «No» is selected, formatting is aborted and you return to the
=
submenu.
LRF
Rangefinder
Menu item «Rangefinder» allows you to set up built-in rangefinder's
parameters as follows:
Enter the main menu with a long press of the M (3) button.
=
Enter the submenu " Rangefinder
=
Set the desired parameter with the
=
Selection of reticle shape
Select one of the three reticle shapes with the UP (2) and
џ
DOWN (5) buttons.
Confirm selection with a brief press of the М (3) button.
џ
Selected reticle will appear on the display.
џ
The reticle will disappear from the display if the rangefinder is not used
џ
longer than 4 seconds.
Function «Target position angle» (TPA)
Function «TPA» allows you to change the angle of target location
џ
(angle of elevation). When the function is activated, the angle is shown
continuously. When the function is disabled, the angle is shown if the
rangefinder is working. The angle is shown in a pop-up menu during
measurement.
Select to activate «TPA».
џ
Confirm selection with a brief press of the M (3) button.
џ
«THD» function
«THD» function allows you to measure true horizontla distance to a
џ
target based on the angle of elevation value.
Select to activate «THD».
џ
Confirm selection with a brief press of the M (3) button. Hereinafter
џ
message THD will appear above the distance readings.
" with a short press of the M button.
UP (2) and DOWN (5) buttons.
9