Worx WG168E Manual Original página 11

This product has been marked
with a symbol relating to
removing electric and electronic
waste. This means that this
product shall not be discarded
with household waste but that it
shall be returned to a collection
system which conforms to the
European Directive 2002/96/
CE. It will then be recycled or
dismantled in order to reduce
the impact on the environment.
Electric and electronic equipment
can be hazardous for the
environment and for human
health since they contain
hazardous substances.
Edging
Trimming
Cordless Lawn Trimmer/Lawn Edge Trimmer
AssEmbLy
1. ASSEMbLy OF ThE MAIN hANDLE
(See Fig. A1, A2)
Align and insert the shaft into the upper
housing until a click can be heard. Make sure
the grooves are correctly matched. (See Fig.
A1). Tighten the shaft locking knob in the
direction indicated to lock
NOTE: Make sure that the handle is
firmly locked in place
2. ASSEMbLy OF ThE AuxILIARy
hANDLE (See Fig. b1, b2)
Slide the auxiliary handle onto the grooves
of auxiliary handle support until a click can
be heard. And make sure the auxiliary handle
locking clamp is closed. (See Fig. B1)
NOTE: Make sure the handle is firmly
secured in place.
If the handle is loose, then tighten the 2 side
screws. (See Fig. B2)
3. ASSEMbLy OF ThE SAFETy guARD
(See Fig. C1, C2, C3)
Remove the screw from the bottom of the
trimmer head - then attach the safety guard to
the housing.
Secure the guard in place by the refitting of
the screw.
Remove the line cutter protection tape.
(See Fig. C3)
oPErATIoN INsTrUCTIoNs
INTENDED uSE
The machine is intended for the cutting of
grass and weeds under bushes, as well as on
slopes and edges that can not be reached with
the lawn mower.
wARNINg! The charger and battery
pack are specially designed to work
together so do not attempt to use any other
devices. Never insert or allow metallic objects
into your charger or battery pack connections
because of an electrical failure and hazard will
occur.
(See Fig. A2).
EN
11