Data Hold Functions; Peak Hold Functions - Beta 1760PA/AC-DC Manual Del Usuario

DATA HOLD
This is a function used to freeze the reading on the display, ideal for later viewing.
1 Press the [HOLD] button once. When the Hold is activated, the meter beeps, freezes the reading,
and displays the "HOLD" indicator on the LCD.
2 To deactivate the "HOLD" function. press [HOLD] button once, the meter will beep and the
meter will start reading new measurements.
PEAk HOLD
This is a function used to record the maximum and minimum readings on the display for the
voltage and current ranges.
1 Press the [PEAk] button once. This will record the "PEAK" maximum, the meter beeps, and
displays the "P MAX" indicator on the LCD.
2 Press the [PEAk] button again. This will record the "PEAK" minimum, the meter beeps. and
displays the "P MIN" indicator on the LCD.
3 To deactivate the "PEAK" function, press button [PEAk] for 3 seconds. The meter will beep
and the meter will start reading new measurements.
47