Pando PHM-950 Manual De Uso página 119

INOXPAN S.L.
4.4. HIDING/DISPLAYING THE CLOCK
If the clock display disturbs you, you can hide it proceding as follows:
1. Press the function knob (1) for 3 seconds.
2. Turn the rotating knob (3) to navigate through the secondary menu options. The desired option
lights up.
3. Press the rotating knob (3) once, when you see the clock symbol
2. Press the rotating knob (3) for 2 seconds.
3. If you want to see the clock display again, repeat the same procedure
4.5. TIMER
To set the timer, proceed as follows:
1. Press the function knob (1) for 3 seconds.
2. Turn the rotating knob (3) to navigate through the secondary menu options. The desired option
lights up.
3. Press the rotating knob (3) once, when you see the timer symbol
4. Turn the rotating knob (3) to set a time for the alarm to go on.
5. To finish, press the rotating knob (3) to confirm.
4.6. SAFETY BLOCKING
The oven operation can be blocked (for example, to stop it from being used by children).
1. Press the function knob (1) for 3 seconds.
2. Turn the rotating knob (3) to navigate through the secondary menu options. The desired option
lights up.
3. Press the rotating knob (3) once, when you see the safety symbol
4. Turn the rotating knob (3) to choose if you want to turn on or off the option. (ON /OFF)
5. To finish, press the rotating knob (3) to confirm.
6. To unblock the oven, press the Rotating Knob (3) for 2 seconds.
4.7. SHOWROOM MODE
The showroom mode is used in showrooms, to show the clients how the oven works as described
in every function, but there's no activation of the heating loads.
1. Press the function knob (1) for 3 seconds.
2. Turn the rotating knob (3) to navigate through the secondary menu options. The desired option
lights up.
3. Press the rotating knob (3) once, when you see "Sho"
4. Turn the rotating knob (3) to choose if you want to turn on or off the option. (ON /OFF)
5. To finish, press the rotating knob (3) to confirm.
6. To deactivate the showroom mode repeat the same procedure.
NOTE: If the Showroom Mode option is activated, no indication appears on the display.
The "Sho" symbol will be displayed at one minute intervals only when the cooking oven is started.
.
.
. On the display will appear LOC
EN - 13