Indentify; Sampling Site; List Of System Messages - VWR SAS Super IAQ Manual Del Usuario

Press 'ENTER' to list all the available languages:
Use the "Up" or "Down" arrows to select the desired language and press 'ENTER' to confirm.
There are six available languages:
English, French, Spanish, German, Portuguese and Italian.

'INDENTIFY'

This option is used to identify the operator. This should be changed if different operators use the sampler and
especially if the data is to be printed.
From the UTILITY MODE select 'IDENTIFY'.
Press 'ENTER' to modify identification code:
Select the desired character using the "Up" or "Down" arrows and confirm with 'ENTER'.
Select the next desired characters and confirm them by pressing 'ENTER'.
The selected values are stored in the memory and will be kept even after the instrument has been switched off.

'SAMPLING SITE'

Site identification should be changed for samples taken at different sites, especially if the results are to be printed.
From the UTILITY MODE select 'SAMPLING SITE'.
Press 'ENTER' to modify:
Select the desired character using the "Up" or "Down" arrows and confirm with 'ENTER'. Select the next desired
characters and confirm them by pressing 'ENTER'.
The selected values are stored in the memory and will be kept even after the instrument has been switched off.

List of system messages

Besides the messages described in the previous paragraph, the following messages can be displayed: