Troubleshooting - Unold 78216 Instrucciones De Uso

trOuBlEshOOtInG

Problem
The appliance does not operate.
The motor stops during extraction of
juice.
The stainless steel sieve stops turning.
Low juice yield.
solution
Check to make sure that all parts have been
ƒ
assembled correctly. If this is not the case, a safety
system prevents the appliance from being switched
on. Assemble the appliance again as described in
the section "Preparing the appliance for operation"
on page 15.
Switch the appliance off; unplug it from the power
ƒ
supply.
Disassemble the
ƒ
"Disassembly" on page 16 and check whether the
sieve is jammed by pieces of pulp. Clean the sieve
under warm running water with a plastic dish brush,
reassemble the appliance and continue processing.
To prevent the sieve from becoming jammed, do not
ƒ
use fruits or vegetables that are very hard or stringy.
Do not add fruit or vegetables to the filling shaft too
quickly and empty the pomace container regularly.
Switch the appliance off; unplug it from the power
ƒ
supply.
Disassemble the
ƒ
"Disassembly" on page 16 and check whether the
sieve is jammed by pieces of pulp. Clean the sieve
under warm running water with a plastic dish brush,
reassemble the appliance and continue processing.
To prevent the sieve from becoming jammed, do not
ƒ
use fruits or vegetables that are very hard or stringy.
Do not add fruit or vegetables to the filling shaft too
quickly and empty the pomace container regularly.
Check whether the sieve is jammed.
ƒ
Add the ingredients more slowly into the filling
ƒ
shaft.
Some fruits and vegetables yield less juice, for
ƒ
example apricots.
appliance as described
appliance as described
in
in
19