Troubleshooting - Unold 78245 Instrucciones De Uso

TROUBLESHOOTING

Problem
The appliance does not operate. Check to make sure that all parts have been
The motor stops during extrac-
tion of juice.
The stainless steel sieve stops
turning.
Low juice yield.
Solution
assembled correctly. If this is not the case,
a safety system prevents the appliance from
being switched on. Assemble the appliance
again as described in the section "Preparing
the appliance for operation".
Switch the appliance off; unplug it from the
power supply.
Disassemble the appliance as described in
"Disassembly" and check whether the sieve
is jammed by pieces of pulp. Clean the sie-
ve under warm running water with a plastic
dish brush, reassemble the appliance and
continue processing.
To prevent the sieve from becoming jam-
med, do not use fruits or vegetables that are
very hard or stringy. Do not add fruit or ve-
getables to the filling shaft too quickly and
empty the pomace container regularly.
Switch the appliance off; unplug it from the
power supply.
Disassemble the appliance as described in
"Disassembly" and check whether the sieve
is jammed by pieces of pulp. Clean the sie-
ve under warm running water with a plastic
dish brush, reassemble the appliance and
continue processing.
To prevent the sieve from becoming jam-
med, do not use fruits or vegetables that are
very hard or stringy. Do not add fruit or ve-
getables to the filling shaft too quickly and
empty the pomace container regularly.
Check whether the sieve is jammed.
Add the ingredients more slowly into the fil-
ling shaft.
Some fruits and vegetables yield less juice,
for example apricots.
31