jbc Advanced Serie Manual Del Usuario página 5

These tips are
specially designed to
clean the pads.
Ref.
A ø
5600
A ø (mm)
B ø (mm)
max. pin ø
B ø
(mm)
High thermal performance Ref. HT: This kind of tip has great heat-transmission capability, and thus greater speed
in desoldering. They are not quite as durable as the armoured long-life type.
To empty the solder tin deposit and change
the filter
For this, the lid needs to be unscrewed and
first the tin deposit and then its spiral must be
removed to clean the inner part of the deposit
with a brush.
- The condition of the filter must be checked
and replaced if dirty or damaged.
- The deposit needs to be inserted with
spiral filter put into place. Then the whole
must be closed by screwing the lid shut.
Deposit
DESOLDERING TIPS
5600-011 HT 5600-012 HT 5600-013
5600-001 HT 5600-002 HT 5600-003
002 HT
001 HT
012 HT
011 HT
1.4 1.8
0.6 0.8
0.4 0.6
Lid
Filter Ref.0780840
Spiral
Brush
Ref. 0786640
5600-004
003 / 013 004
2.7 3.2
1 1.3
0.8 1.1
Placement instruction of the spiral in the tin
deposit
The spiral needs to be positioned between the
2 lines marked on the tin deposit.
Spiral
3
ENGLISH
5600-005 5600-006 5600-007
005 006
3.4 4.2
1.6 2
1.4 1.7
007
4.8
2.5
2.3