jbc Advanced Serie Manual Del Usuario página 6

ENGLISH
Solder tin deposits
It can be chosen between two different deposit
types:
- Metal Ref. 0812630.
- Glass Ref. 0812620.
C h a n g e t h e h e a t i n g e l e m e n t o f t h e
desoldering iron (Ref. 5600010)
- To perform this operation, the deposit
lid needs to be loosened.
Fixing screw
Heating element
Ref. 5600010
- Loosen the screw indicated in the picture
and remove the heating element.
- Place the new heating element.
Lid
Important.
- For a good connection it is essential to insert
the cartridge lining up the mark
handle screw cap.
Fixing screw
- Tighten the screw indicated in the picture
then thigten the lid.
JBC reserves the right to make technical changes without prior
notification.
4
Alignment
Lid
with the